Charon/.grype.yaml

# Grype vulnerability suppression configuration
# Automatically loaded by Grype for vulnerability scanning
# Review and update when upstream fixes are available
# Documentation: https://github.com/anchore/grype#specifying-matches-to-ignore

ignore:
  # CVE-2026-2673: OpenSSL TLS 1.3 server key exchange group downgrade
  # Severity: HIGH (CVSS 7.5)
  # Packages: libcrypto3 3.5.5-r0 and libssl3 3.5.5-r0 (Alpine apk)
  # Status: No upstream fix available — Alpine 3.23 still ships libcrypto3/libssl3 3.5.5-r0 as of 2026-03-18
  #
  # Vulnerability Details:
  # - When DEFAULT is in the TLS 1.3 group configuration, the OpenSSL server may select
  #   a weaker key exchange group than preferred, enabling a limited key exchange downgrade.
  # - Only affects systems acting as a raw TLS 1.3 server using OpenSSL's server-side group negotiation.
  #
  # Root Cause (No Fix Available):
  # - Alpine upstream has not published a patched libcrypto3/libssl3 for Alpine 3.23.
  # - Checked: Alpine 3.23 still ships libcrypto3/libssl3 3.5.5-r0 as of 2026-03-18.
  # - Fix path: once Alpine publishes a patched libcrypto3/libssl3, rebuild the Docker image
  #   and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (No upstream fix; limited exposure in Charon context)
  # - Charon terminates TLS at the Caddy layer — the Go backend does not act as a raw TLS 1.3 server.
  # - The vulnerability requires the affected application to directly configure TLS 1.3 server
  #   group negotiation via OpenSSL, which Charon does not do.
  # - Container-level isolation reduces the attack surface further.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor Alpine security advisories: https://security.alpinelinux.org/vuln/CVE-2026-2673
  # - Weekly CI security rebuild (security-weekly-rebuild.yml) flags any new CVEs in the full image.
  #
  # Review:
  # - Reviewed 2026-03-18 (initial suppression): no upstream fix available. Set 30-day review.
  # - Extended 2026-04-04: Alpine 3.23 still ships 3.5.5-r0. No upstream fix available.
  # - Next review: 2026-05-18. Remove suppression immediately once upstream fixes.
  #
  # Removal Criteria:
  # - Alpine publishes a patched version of libcrypto3 and libssl3
  # - Rebuild Docker image and verify CVE-2026-2673 no longer appears in grype-results.json
  # - Remove both these entries and the corresponding .trivyignore entry simultaneously
  #
  # References:
  # - CVE-2026-2673: https://nvd.nist.gov/vuln/detail/CVE-2026-2673
  # - Alpine security tracker: https://security.alpinelinux.org/vuln/CVE-2026-2673
  - vulnerability: CVE-2026-2673
    package:
      name: libcrypto3
      version: "3.5.5-r0"
      type: apk
    reason: |
      HIGH — OpenSSL TLS 1.3 server key exchange group downgrade in libcrypto3 3.5.5-r0 (Alpine base image).
      No upstream fix: Alpine 3.23 still ships libcrypto3 3.5.5-r0 as of 2026-03-18. Charon
      terminates TLS at the Caddy layer; the Go backend does not act as a raw TLS 1.3 server.
      Risk accepted pending Alpine upstream patch.
    expiry: "2026-05-18"  # Extended 2026-04-04: Alpine 3.23 still ships 3.5.5-r0. Next review 2026-05-18.

    # Action items when this suppression expires:
    # 1. Check Alpine security tracker: https://security.alpinelinux.org/vuln/CVE-2026-2673
    # 2. If a patched Alpine package is now available:
    #    a. Rebuild Docker image without suppression
    #    b. Run local security-scan-docker-image and confirm CVE is resolved
    #    c. Remove this suppression entry, the libssl3 entry below, and the .trivyignore entry
    # 3. If no fix yet: Extend expiry by 14–30 days and update the review comment above
    # 4. If extended 3+ times: Open an issue to track the upstream status formally

  # CVE-2026-2673 (libssl3) — see full justification in the libcrypto3 entry above
  - vulnerability: CVE-2026-2673
    package:
      name: libssl3
      version: "3.5.5-r0"
      type: apk
    reason: |
      HIGH — OpenSSL TLS 1.3 server key exchange group downgrade in libssl3 3.5.5-r0 (Alpine base image).
      No upstream fix: Alpine 3.23 still ships libssl3 3.5.5-r0 as of 2026-03-18. Charon
      terminates TLS at the Caddy layer; the Go backend does not act as a raw TLS 1.3 server.
      Risk accepted pending Alpine upstream patch.
    expiry: "2026-05-18"  # Extended 2026-04-04: see libcrypto3 entry above for action items.

  # CVE-2026-31790: OpenSSL vulnerability in Alpine base image packages
  # Severity: HIGH
  # Packages: libcrypto3 3.5.5-r0 and libssl3 3.5.5-r0 (Alpine apk)
  # Status: No upstream fix available — Alpine 3.23 still ships libcrypto3/libssl3 3.5.5-r0 as of 2026-04-09
  #
  # Root Cause (No Fix Available):
  # - Alpine upstream has not published a patched libcrypto3/libssl3 for Alpine 3.23.
  # - Checked: Alpine 3.23 still ships libcrypto3/libssl3 3.5.5-r0 as of 2026-04-09.
  # - Fix path: once Alpine publishes a patched libcrypto3/libssl3, rebuild the Docker image
  #   and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (No upstream fix; documented in SECURITY.md)
  # - Charon terminates TLS at the Caddy layer — the Go backend does not act as a raw TLS server.
  # - Container-level isolation reduces the attack surface further.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor Alpine security advisories: https://security.alpinelinux.org/vuln/CVE-2026-31790
  # - Weekly CI security rebuild (security-weekly-rebuild.yml) flags any new CVEs in the full image.
  #
  # Review:
  # - Reviewed 2026-04-09 (initial suppression): no upstream fix available. Set 30-day review.
  # - Next review: 2026-05-09. Remove suppression immediately once upstream fixes.
  #
  # Removal Criteria:
  # - Alpine publishes a patched version of libcrypto3 and libssl3
  # - Rebuild Docker image and verify CVE-2026-31790 no longer appears in grype-results.json
  # - Remove both these entries and the corresponding .trivyignore entry simultaneously
  #
  # References:
  # - CVE-2026-31790: https://nvd.nist.gov/vuln/detail/CVE-2026-31790
  # - Alpine security tracker: https://security.alpinelinux.org/vuln/CVE-2026-31790
  - vulnerability: CVE-2026-31790
    package:
      name: libcrypto3
      version: "3.5.5-r0"
      type: apk
    reason: |
      HIGH — OpenSSL vulnerability in libcrypto3 3.5.5-r0 (Alpine base image).
      No upstream fix: Alpine 3.23 still ships libcrypto3 3.5.5-r0 as of 2026-04-09. Charon
      terminates TLS at the Caddy layer; the Go backend does not act as a raw TLS server.
      Risk accepted pending Alpine upstream patch. Documented in SECURITY.md.
    expiry: "2026-05-09"  # Reviewed 2026-04-09: no upstream fix available. Next review 2026-05-09.

    # Action items when this suppression expires:
    # 1. Check Alpine security tracker: https://security.alpinelinux.org/vuln/CVE-2026-31790
    # 2. If a patched Alpine package is now available:
    #    a. Rebuild Docker image without suppression
    #    b. Run local security-scan-docker-image and confirm CVE is resolved
    #    c. Remove this suppression entry, the libssl3 entry below, and the .trivyignore entry
    # 3. If no fix yet: Extend expiry by 14–30 days and update the review comment above
    # 4. If extended 3+ times: Open an issue to track the upstream status formally

  # CVE-2026-31790 (libssl3) — see full justification in the libcrypto3 entry above
  - vulnerability: CVE-2026-31790
    package:
      name: libssl3
      version: "3.5.5-r0"
      type: apk
    reason: |
      HIGH — OpenSSL vulnerability in libssl3 3.5.5-r0 (Alpine base image).
      No upstream fix: Alpine 3.23 still ships libssl3 3.5.5-r0 as of 2026-04-09. Charon
      terminates TLS at the Caddy layer; the Go backend does not act as a raw TLS server.
      Risk accepted pending Alpine upstream patch. Documented in SECURITY.md.
    expiry: "2026-05-09"  # Reviewed 2026-04-09: see libcrypto3 entry above for action items.

  # GHSA-69x3-g4r3-p962 / CVE-2026-25793: Nebula ECDSA Signature Malleability
  # Severity: HIGH (CVSS 8.1)
  # Package: github.com/slackhq/nebula v1.9.7 (embedded in /usr/bin/caddy via smallstep/certificates)
  # Status: Fix exists in nebula v1.10.3 — smallstep/certificates cannot compile against v1.10+ APIs
  #
  # Vulnerability Details:
  # - ECDSA signature malleability in nebula allows potential authentication bypass via
  #   crafted certificate signatures (CWE-347).
  # - CVSSv3: AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N (CVSS 8.1)
  #
  # Root Cause (Third-Party Binary + Upstream API Incompatibility):
  # - Charon does not use nebula directly. The library is compiled into the Caddy binary
  #   via the caddy-security plugin → smallstep/certificates dependency chain.
  # - Nebula v1.10.3 patches the vulnerability but removes legacy APIs that
  #   smallstep/certificates (through v0.30.2) depends on, causing compile failures.
  # - Fix path: once smallstep/certificates releases a version compatible with nebula >= v1.10.3,
  #   update the Dockerfile and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (No direct use + upstream API incompatibility blocks fix)
  # - Charon does not use Nebula VPN PKI by default. The vulnerable code path is only
  #   reachable if Nebula-based certificate provisioning is explicitly configured.
  # - The attack requires network access and a crafted certificate, which is not part of
  #   standard Charon deployment.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor smallstep/certificates releases: https://github.com/smallstep/certificates/releases
  # - Monitor nebula releases: https://github.com/slackhq/nebula/releases
  # - Weekly CI security rebuild flags the moment a compatible upstream ships.
  #
  # Review:
  # - Reviewed 2026-02-19 (initial suppression in .trivyignore): certificates v0.27.5 pins nebula v1.9.x.
  # - Re-evaluated 2026-04-10: nebula v1.10.3 has the fix but certificates (through v0.30.2)
  #   uses legacy APIs removed in v1.10+. Still blocked. Set 30-day review.
  # - Next review: 2026-05-10. Remove suppression once certificates ships with nebula >= v1.10.3.
  #
  # Removal Criteria:
  # - smallstep/certificates releases a version compatible with nebula >= v1.10.3
  # - Update Dockerfile nebula pin, rebuild, run security-scan-docker-image, confirm resolved
  # - Remove this entry and the corresponding .trivyignore entry simultaneously
  #
  # References:
  # - GHSA-69x3-g4r3-p962: https://github.com/advisories/GHSA-69x3-g4r3-p962
  # - CVE-2026-25793: https://nvd.nist.gov/vuln/detail/CVE-2026-25793
  # - Nebula releases: https://github.com/slackhq/nebula/releases
  # - smallstep/certificates releases: https://github.com/smallstep/certificates/releases
  - vulnerability: CVE-2026-25793
    package:
      name: github.com/slackhq/nebula
      version: "v1.9.7"
      type: go-module
    reason: |
      HIGH — ECDSA signature malleability in nebula v1.9.7 embedded in /usr/bin/caddy.
      Fix exists in nebula v1.10.3 but smallstep/certificates (through v0.30.2) uses legacy APIs
      removed in v1.10+, causing compile failures. Charon does not use Nebula VPN PKI by default.
      Risk accepted; no remediation until smallstep/certificates ships with nebula >= v1.10.3.
      Re-evaluated 2026-04-10: still blocked by upstream API incompatibility.
    expiry: "2026-05-10"  # Re-evaluated 2026-04-10: certificates through v0.30.2 incompatible with nebula v1.10+.

  # GHSA-6g7g-w4f8-9c9x: buger/jsonparser Delete panic on malformed JSON (DoS)
  # Severity: HIGH (CVSS 7.5)
  # Package: github.com/buger/jsonparser v1.1.1 (embedded in /usr/local/bin/crowdsec and /usr/local/bin/cscli)
  # Status: UPSTREAM FIX EXISTS (v1.1.2 released 2026-03-20) — awaiting CrowdSec to update dependency
  # NOTE: As of 2026-04-20, grype v0.111.0 with fresh DB no longer flags this finding in the image.
  #       This suppression is retained as a safety net in case future DB updates re-surface it.
  #
  # Vulnerability Details:
  # - The Delete function fails to validate offsets on malformed JSON input, producing a
  #   negative slice index and a runtime panic — denial of service (CWE-125).
  # - CVSSv3: AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
  #
  # Root Cause (Third-Party Binary — Fix Exists Upstream, Not Yet in CrowdSec):
  # - Charon does not use buger/jsonparser directly. It is compiled into CrowdSec binaries.
  # - buger/jsonparser released v1.1.2 on 2026-03-20 fixing issue #275.
  # - CrowdSec has not yet released a version built with buger/jsonparser v1.1.2.
  # - Fix path: once CrowdSec updates their dependency and rebuilds, rebuild the Docker image
  #   and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (Limited exploitability; fix exists upstream but not yet in CrowdSec)
  # - The DoS vector requires passing malformed JSON to the vulnerable Delete function within
  #   CrowdSec's internal processing pipeline; this is not a direct attack surface in Charon.
  # - CrowdSec's exposed surface is its HTTP API (not raw JSON stream parsing via this path).
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor CrowdSec releases for a build using buger/jsonparser >= v1.1.2.
  # - CrowdSec releases: https://github.com/crowdsecurity/crowdsec/releases
  # - Weekly CI security rebuild flags the moment a fixed image ships.
  #
  # Review:
  # - Reviewed 2026-03-19 (initial suppression): no upstream fix. Set 30-day review.
  # - Extended 2026-04-04: no upstream fix. buger/jsonparser issue #275 still open.
  # - Updated 2026-04-20: buger/jsonparser v1.1.2 released 2026-03-20. CrowdSec not yet updated.
  #   Grype v0.111.0 with fresh DB (2026-04-20) no longer flags this finding. Suppression retained
  #   as a safety net. Next review: 2026-05-19 — remove if CrowdSec ships with v1.1.2+.
  #
  # Removal Criteria:
  # - CrowdSec releases a version built with buger/jsonparser >= v1.1.2
  # - Rebuild Docker image, run security-scan-docker-image, confirm finding is resolved
  # - Remove this entry and the corresponding .trivyignore entry simultaneously
  #
  # References:
  # - GHSA-6g7g-w4f8-9c9x: https://github.com/advisories/GHSA-6g7g-w4f8-9c9x
  # - Upstream fix: https://github.com/buger/jsonparser/releases/tag/v1.1.2
  # - golang/vulndb: https://github.com/golang/vulndb/issues/4514
  # - CrowdSec releases: https://github.com/crowdsecurity/crowdsec/releases
  - vulnerability: GHSA-6g7g-w4f8-9c9x
    package:
      name: github.com/buger/jsonparser
      version: "v1.1.1"
      type: go-module
    reason: |
      HIGH — DoS panic via malformed JSON in buger/jsonparser v1.1.1 embedded in CrowdSec binaries.
      Upstream fix: buger/jsonparser v1.1.2 released 2026-03-20; CrowdSec has not yet updated their
      dependency. Grype no longer flags this as of 2026-04-20 (fresh DB). Suppression retained as
      safety net pending CrowdSec update. Charon does not use this package directly.
      Updated 2026-04-20: fix v1.1.2 exists upstream; awaiting CrowdSec dependency update.
    expiry: "2026-05-19"  # Review 2026-05-19: remove if CrowdSec ships with buger/jsonparser >= v1.1.2.

    # Action items when this suppression expires:
    # 1. Check if CrowdSec has released a version with buger/jsonparser >= v1.1.2:
    #    https://github.com/crowdsecurity/crowdsec/releases
    # 2. If CrowdSec has updated: rebuild Docker image, run security-scan-docker-image,
    #    and remove this suppression entry and the corresponding .trivyignore entry
    # 3. If grype still does not flag it with fresh DB: consider removing the suppression as
    #    it may no longer be necessary
    # 4. If no CrowdSec update yet: Extend expiry by 30 days

  # GHSA-jqcq-xjh3-6g23: pgproto3/v2 DataRow.Decode panic on negative field length (DoS)
  # Severity: HIGH (CVSS 7.5)
  # Package: github.com/jackc/pgproto3/v2 v2.3.3 (embedded in /usr/local/bin/crowdsec and /usr/local/bin/cscli)
  # Status: NO fix in pgproto3/v2 (archived/EOL) — fix path requires CrowdSec to migrate to pgx/v5
  #
  # Vulnerability Details:
  # - DataRow.Decode does not validate field lengths; a malicious or compromised PostgreSQL server
  #   can send a negative field length causing a slice-bounds panic — denial of service (CWE-129).
  # - CVSSv3: AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
  #
  # Root Cause (EOL Module + Third-Party Binary):
  # - Charon does not use pgproto3/v2 directly nor communicate with PostgreSQL. The package
  #   is compiled into CrowdSec binaries for their internal database communication.
  # - The pgproto3/v2 module is archived and EOL; no fix will be released. The fix path
  #   is migration to pgx/v5, which embeds an updated pgproto3/v3.
  # - Fix path: once CrowdSec migrates to pgx/v5 and releases an updated binary, rebuild
  #   the Docker image and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (Non-exploitable in Charon context + no upstream fix path)
  # - The vulnerability requires a malicious PostgreSQL server response. Charon uses SQLite
  #   internally and does not run PostgreSQL. CrowdSec's database path is not exposed to
  #   external traffic in a standard Charon deployment.
  # - The attack requires a compromised database server, which would imply full host compromise.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor CrowdSec releases for pgx/v5 migration:
  #   https://github.com/crowdsecurity/crowdsec/releases
  # - Weekly CI security rebuild flags the moment a fixed image ships.
  #
  # Review:
  # - Reviewed 2026-03-19 (initial suppression): pgproto3/v2 is EOL; no fix exists or will exist.
  #   Waiting on CrowdSec to migrate to pgx/v5. Set 30-day review.
  # - Extended 2026-04-04: CrowdSec has not migrated to pgx/v5 yet.
  # - Next review: 2026-05-19. Remove suppression once CrowdSec ships with pgx/v5.
  #
  # Removal Criteria:
  # - CrowdSec releases a version with pgx/v5 (pgproto3/v3) replacing pgproto3/v2
  # - Rebuild Docker image, run security-scan-docker-image, confirm finding is resolved
  # - Remove this entry and the corresponding .trivyignore entry simultaneously
  #
  # References:
  # - GHSA-jqcq-xjh3-6g23: https://github.com/advisories/GHSA-jqcq-xjh3-6g23
  # - pgproto3/v2 archive notice: https://github.com/jackc/pgproto3
  # - pgx/v5 (replacement): https://github.com/jackc/pgx
  # - CrowdSec releases: https://github.com/crowdsecurity/crowdsec/releases
  - vulnerability: GHSA-jqcq-xjh3-6g23
    package:
      name: github.com/jackc/pgproto3/v2
      version: "v2.3.3"
      type: go-module
    reason: |
      HIGH — DoS panic via negative field length in pgproto3/v2 v2.3.3 embedded in CrowdSec binaries.
      pgproto3/v2 is archived/EOL with no fix planned; fix path requires CrowdSec to migrate to pgx/v5.
      Charon uses SQLite, not PostgreSQL; this code path is not reachable in a standard deployment.
      Risk accepted; no remediation until CrowdSec ships with pgx/v5.
      Reviewed 2026-03-19: pgproto3/v2 EOL confirmed; CrowdSec has not migrated to pgx/v5 yet.
    expiry: "2026-05-19"  # Extended 2026-04-04: no fix path until CrowdSec migrates to pgx/v5.

    # Action items when this suppression expires:
    # 1. Check CrowdSec releases for pgx/v5 migration:
    #    https://github.com/crowdsecurity/crowdsec/releases
    # 2. Verify with: `go version -m /path/to/crowdsec | grep pgproto3`
    #    Expected: pgproto3/v3 (or no pgproto3 reference if fully replaced)
    # 3. If CrowdSec has migrated:
    #    a. Rebuild Docker image and run local security-scan-docker-image
    #    b. Remove this suppression entry and the corresponding .trivyignore entry
    # 4. If not yet migrated: Extend expiry by 30 days and update the review comment above
    # 5. If extended 3+ times: Open an upstream issue on crowdsecurity/crowdsec requesting pgx/v5 migration

  # GHSA-x6gf-mpr2-68h6 / CVE-2026-4427: pgproto3/v2 DataRow.Decode panic on negative field length (DoS)
  # Severity: HIGH (CVSS 7.5)
  # Package: github.com/jackc/pgproto3/v2 v2.3.3 (embedded in /usr/local/bin/crowdsec and /usr/local/bin/cscli)
  # Status: NO fix in pgproto3/v2 (archived/EOL) — fix path requires CrowdSec to migrate to pgx/v5
  # Note: This is the NVD/Red Hat advisory alias for the same underlying vulnerability as GHSA-jqcq-xjh3-6g23
  #
  # Vulnerability Details:
  # - DataRow.Decode does not validate field lengths; a malicious or compromised PostgreSQL server
  #   can send a negative field length causing a slice-bounds panic — denial of service (CWE-129).
  # - CVSSv3: AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H (CVSS 7.5)
  #
  # Root Cause (EOL Module + Third-Party Binary):
  # - Same underlying vulnerability as GHSA-jqcq-xjh3-6g23; tracked separately by NVD/Red Hat as CVE-2026-4427.
  # - Charon does not use pgproto3/v2 directly nor communicate with PostgreSQL. The package
  #   is compiled into CrowdSec binaries for their internal database communication.
  # - The pgproto3/v2 module is archived and EOL; no fix will be released. The fix path
  #   is migration to pgx/v5, which embeds an updated pgproto3/v3.
  # - Fix path: once CrowdSec migrates to pgx/v5 and releases an updated binary, rebuild
  #   the Docker image and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (Non-exploitable in Charon context + no upstream fix path)
  # - The vulnerability requires a malicious PostgreSQL server response. Charon uses SQLite
  #   internally and does not run PostgreSQL. CrowdSec's database path is not exposed to
  #   external traffic in a standard Charon deployment.
  # - The attack requires a compromised database server, which would imply full host compromise.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor CrowdSec releases for pgx/v5 migration:
  #   https://github.com/crowdsecurity/crowdsec/releases
  # - Weekly CI security rebuild flags the moment a fixed image ships.
  #
  # Review:
  # - Reviewed 2026-03-21 (initial suppression): pgproto3/v2 is EOL; no fix exists or will exist.
  #   Waiting on CrowdSec to migrate to pgx/v5. Set 30-day review. Sibling GHSA-jqcq-xjh3-6g23
  #   was already suppressed; this alias surfaced as a separate Grype match via NVD/Red Hat tracking.
  # - Extended 2026-04-04: CrowdSec has not migrated to pgx/v5 yet.
  # - Next review: 2026-05-21. Remove suppression once CrowdSec ships with pgx/v5.
  #
  # Removal Criteria:
  # - Same as GHSA-jqcq-xjh3-6g23: CrowdSec releases a version with pgx/v5 replacing pgproto3/v2
  # - Rebuild Docker image, run security-scan-docker-image, confirm both advisories are resolved
  # - Remove this entry, GHSA-jqcq-xjh3-6g23 entry, and both .trivyignore entries simultaneously
  #
  # References:
  # - GHSA-x6gf-mpr2-68h6: https://github.com/advisories/GHSA-x6gf-mpr2-68h6
  # - CVE-2026-4427: https://nvd.nist.gov/vuln/detail/CVE-2026-4427
  # - Red Hat: https://access.redhat.com/security/cve/CVE-2026-4427
  # - pgproto3/v2 archive notice: https://github.com/jackc/pgproto3
  # - pgx/v5 (replacement): https://github.com/jackc/pgx
  # - CrowdSec releases: https://github.com/crowdsecurity/crowdsec/releases
  - vulnerability: GHSA-x6gf-mpr2-68h6
    package:
      name: github.com/jackc/pgproto3/v2
      version: "v2.3.3"
      type: go-module
    reason: |
      HIGH — DoS panic via negative field length in pgproto3/v2 v2.3.3 embedded in CrowdSec binaries.
      NVD/Red Hat alias (CVE-2026-4427) for the same underlying bug as GHSA-jqcq-xjh3-6g23.
      pgproto3/v2 is archived/EOL with no fix planned; fix path requires CrowdSec to migrate to pgx/v5.
      Charon uses SQLite, not PostgreSQL; this code path is not reachable in a standard deployment.
      Risk accepted; no remediation until CrowdSec ships with pgx/v5.
      Reviewed 2026-03-21: pgproto3/v2 EOL confirmed; CrowdSec has not migrated to pgx/v5 yet.
    expiry: "2026-05-21"  # Extended 2026-04-04: no fix path until CrowdSec migrates to pgx/v5.

    # Action items when this suppression expires:
    # 1. Check CrowdSec releases for pgx/v5 migration:
    #    https://github.com/crowdsecurity/crowdsec/releases
    # 2. Verify with: `go version -m /path/to/crowdsec | grep pgproto3`
    #    Expected: pgproto3/v3 (or no pgproto3 reference if fully replaced)
    # 3. If CrowdSec has migrated:
    #    a. Rebuild Docker image and run local security-scan-docker-image
    #    b. Remove this entry, GHSA-jqcq-xjh3-6g23 entry, and both .trivyignore entries
    # 4. If not yet migrated: Extend expiry by 30 days and update the review comment above
    # 5. If extended 3+ times: Open an upstream issue on crowdsecurity/crowdsec requesting pgx/v5 migration

  # CVE-2026-32286: pgproto3/v2 buffer overflow in DataRow handling (DoS)
  # Severity: HIGH (CVSS 7.5)
  # Package: github.com/jackc/pgproto3/v2 v2.3.3 (embedded in /usr/local/bin/crowdsec and /usr/local/bin/cscli)
  # Status: NO fix in pgproto3/v2 (archived/EOL) — fix path requires CrowdSec to migrate to pgx/v5
  #
  # Vulnerability Details:
  # - Buffer overflow in pgproto3/v2 DataRow handling allows a malicious or compromised PostgreSQL
  #   server to trigger a denial of service via crafted protocol messages (CWE-120).
  # - CVSSv3: AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H (CVSS 7.5)
  #
  # Root Cause (EOL Module + Third-Party Binary):
  # - Same affected module as GHSA-jqcq-xjh3-6g23 and GHSA-x6gf-mpr2-68h6 — pgproto3/v2 v2.3.3
  #   is the final release (repository archived Jul 12, 2025). No fix will be released.
  # - Charon does not use pgproto3/v2 directly nor communicate with PostgreSQL. The package
  #   is compiled into CrowdSec binaries for their internal database communication.
  # - Fix exists only in pgproto3/v3 (used by pgx/v5). CrowdSec v1.7.7 (latest) still depends
  #   on pgx/v4 → pgproto3/v2. Dockerfile already applies best-effort mitigation (pgx/v4@v4.18.3).
  # - Fix path: once CrowdSec migrates to pgx/v5, rebuild the Docker image and remove this suppression.
  #
  # Risk Assessment: ACCEPTED (Non-exploitable in Charon context + no upstream fix path)
  # - The vulnerability requires a malicious PostgreSQL server response. Charon uses SQLite
  #   internally and does not run PostgreSQL. CrowdSec's database path is not exposed to
  #   external traffic in a standard Charon deployment.
  # - CrowdSec's PostgreSQL code path is not directly exposed to untrusted network input in
  #   Charon's deployment.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor CrowdSec releases for pgx/v5 migration:
  #   https://github.com/crowdsecurity/crowdsec/releases
  # - Weekly CI security rebuild flags the moment a fixed image ships.
  #
  # Review:
  # - Reviewed 2026-04-10 (initial suppression): pgproto3/v2 is EOL; no fix exists or will exist.
  #   Waiting on CrowdSec to migrate to pgx/v5. Set 90-day review.
  # - Next review: 2026-07-09. Remove suppression once CrowdSec ships with pgx/v5.
  #
  # Removal Criteria:
  # - Same as GHSA-jqcq-xjh3-6g23: CrowdSec releases a version with pgx/v5 replacing pgproto3/v2
  # - Rebuild Docker image, run security-scan-docker-image, confirm all pgproto3/v2 advisories are resolved
  # - Remove this entry, GHSA-jqcq-xjh3-6g23 entry, GHSA-x6gf-mpr2-68h6 entry, and all .trivyignore entries simultaneously
  #
  # References:
  # - CVE-2026-32286: https://nvd.nist.gov/vuln/detail/CVE-2026-32286
  # - pgproto3/v2 archive notice: https://github.com/jackc/pgproto3
  # - pgx/v5 (replacement): https://github.com/jackc/pgx
  # - CrowdSec releases: https://github.com/crowdsecurity/crowdsec/releases
  - vulnerability: CVE-2026-32286
    package:
      name: github.com/jackc/pgproto3/v2
      version: "v2.3.3"
      type: go-module
    reason: |
      HIGH — Buffer overflow in pgproto3/v2 v2.3.3 DataRow handling, embedded in CrowdSec binaries.
      pgproto3/v2 v2.3.3 is the final release (archived Jul 2025); no fix will be released.
      Fix exists only in pgproto3/v3 (pgx/v5). CrowdSec v1.7.7 still depends on pgx/v4 → pgproto3/v2.
      Charon uses SQLite, not PostgreSQL; this code path is not reachable in a standard deployment.
      Risk accepted; no remediation until CrowdSec ships with pgx/v5.
      Reviewed 2026-04-10: pgproto3/v2 EOL confirmed; CrowdSec has not migrated to pgx/v5 yet.
    expiry: "2026-07-09"  # Reviewed 2026-04-10: no fix path until CrowdSec migrates to pgx/v5. 90-day expiry.

    # Action items when this suppression expires:
    # 1. Check CrowdSec releases for pgx/v5 migration:
    #    https://github.com/crowdsecurity/crowdsec/releases
    # 2. Verify with: `go version -m /path/to/crowdsec | grep pgproto3`
    #    Expected: pgproto3/v3 (or no pgproto3 reference if fully replaced)
    # 3. If CrowdSec has migrated:
    #    a. Rebuild Docker image and run local security-scan-docker-image
    #    b. Remove this entry, GHSA-jqcq-xjh3-6g23 entry, GHSA-x6gf-mpr2-68h6 entry, and all .trivyignore entries
    # 4. If not yet migrated: Extend expiry by 30 days and update the review comment above
    # 5. If extended 3+ times: Open an upstream issue on crowdsecurity/crowdsec requesting pgx/v5 migration

  # GHSA-pxq6-2prw-chj9 / CVE-2026-33997: Moby off-by-one error in plugin privilege validation
  # Severity: MEDIUM (CVSS 6.8)
  # Package: github.com/docker/docker v28.5.2+incompatible (go-module)
  # Status: Fixed in moby/moby v29.3.1 — NO fix available for docker/docker import path
  #
  # Vulnerability Details:
  # - Off-by-one error in Moby's plugin privilege validation allows potential privilege escalation
  #   via crafted plugin configurations.
  #
  # Root Cause (No Fix Available for Import Path):
  # - Same import path issue as CVE-2026-34040. The fix exists in moby/moby v29.3.1 but not
  #   for the docker/docker import path that Charon uses.
  # - Fix path: same dependency migration pattern as CVE-2026-34040 (if needed) or upstream fix.
  #
  # Risk Assessment: ACCEPTED (Not exploitable in Charon context)
  # - Charon uses the Docker client SDK only (list containers). The vulnerability is in Docker's
  #   plugin privilege validation, which is server-side functionality.
  # - Charon does not run a Docker daemon, install Docker plugins, or interact with plugin privileges.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor docker/docker releases: https://github.com/moby/moby/releases
  # - Weekly CI security rebuild flags the moment a fixed version ships.
  #
  # Review:
  # - Reviewed 2026-03-30 (initial suppression): no fix for docker/docker import path. Set 30-day review.
  # - Next review: 2026-04-30. Remove suppression once a fix is available for the docker/docker import path.
  #
  # Removal Criteria:
  # - docker/docker publishes a patched version OR moby/moby/v2 stabilizes
  # - Update dependency, rebuild, run security-scan-docker-image, confirm finding is resolved
  # - Remove this entry and all corresponding .trivyignore entries simultaneously
  #
  # References:
  # - GHSA-pxq6-2prw-chj9: https://github.com/advisories/GHSA-pxq6-2prw-chj9
  # - CVE-2026-33997: https://nvd.nist.gov/vuln/detail/CVE-2026-33997
  # - moby/moby releases: https://github.com/moby/moby/releases
  - vulnerability: GHSA-pxq6-2prw-chj9
    package:
      name: github.com/docker/docker
      version: "v28.5.2+incompatible"
      type: go-module
    reason: |
      MEDIUM — Off-by-one error in Moby plugin privilege validation in docker/docker v28.5.2+incompatible.
      Fixed in moby/moby v29.3.1 but no fix for docker/docker import path.
      Charon uses Docker client SDK only (list containers); the vulnerability is in Docker's server-side
      plugin privilege validation. Charon does not run a Docker daemon or install Docker plugins.
      Risk accepted; no remediation path until docker/docker publishes a fix or moby/moby/v2 stabilizes.
      Reviewed 2026-03-30: no patched release available for docker/docker import path.
    expiry: "2026-04-30"  # 30-day review: no fix for docker/docker import path. Extend in 30-day increments with documented justification.

    # Action items when this suppression expires:
    # 1. Check docker/docker and moby/moby releases: https://github.com/moby/moby/releases
    # 2. Check if moby/moby/v2 has stabilized: https://github.com/moby/moby
    # 3. If a fix has shipped for docker/docker import path OR moby/moby/v2 is stable:
    #    a. Update the dependency and rebuild Docker image
    #    b. Run local security-scan-docker-image and confirm finding is resolved
    #    c. Remove this entry and all corresponding .trivyignore entries
    # 4. If no fix yet: Extend expiry by 30 days and update the review comment above
    # 5. If extended 3+ times: Open an issue to track moby/moby/v2 migration feasibility

  # GHSA-78h2-9frx-2jm8: go-jose JWE decryption panic (DoS)
  # Severity: HIGH
  # Packages: github.com/go-jose/go-jose/v3 v3.0.4 and github.com/go-jose/go-jose/v4 v4.1.3
  #           (embedded in /usr/bin/caddy)
  # Status: Fix available in go-jose/v3 v3.0.5 and go-jose/v4 v4.1.4 — requires upstream Caddy rebuild
  #
  # Vulnerability Details:
  # - JWE decryption can trigger a panic due to improper input validation, causing
  #   a denial-of-service condition (runtime crash).
  #
  # Root Cause (Third-Party Binary):
  # - Charon does not use go-jose directly. The library is compiled into the Caddy binary
  #   shipped in the Docker image.
  # - Fixes are available upstream (v3.0.5 and v4.1.4) but require a Caddy rebuild to pick up.
  # - Fix path: once the upstream Caddy release includes the patched go-jose versions,
  #   rebuild the Docker image and remove these suppressions.
  #
  # Risk Assessment: ACCEPTED (No direct use + fix requires upstream rebuild)
  # - Charon does not import or call go-jose functions; the library is only present as a
  #   transitive dependency inside the Caddy binary.
  # - The attack vector requires crafted JWE input reaching Caddy's internal JWT handling,
  #   which is limited to authenticated admin-API paths not exposed in Charon deployments.
  #
  # Mitigation (active while suppression is in effect):
  # - Monitor Caddy releases: https://github.com/caddyserver/caddy/releases
  # - Weekly CI security rebuild flags the moment a fixed image ships.
  #
  # Review:
  # - Reviewed 2026-04-05 (initial suppression): fix available upstream but not yet in Caddy release.
  #   Set 30-day review.
  # - Next review: 2026-05-05. Remove suppression once Caddy ships with patched go-jose.
  #
  # Removal Criteria:
  # - Caddy releases a version built with go-jose/v3 >= v3.0.5 and go-jose/v4 >= v4.1.4
  # - Rebuild Docker image, run security-scan-docker-image, confirm finding is resolved
  # - Remove both entries (v3 and v4) and any corresponding .trivyignore entries simultaneously
  #
  # References:
  # - GHSA-78h2-9frx-2jm8: https://github.com/advisories/GHSA-78h2-9frx-2jm8
  # - go-jose releases: https://github.com/go-jose/go-jose/releases
  # - Caddy releases: https://github.com/caddyserver/caddy/releases
  - vulnerability: GHSA-78h2-9frx-2jm8
    package:
      name: github.com/go-jose/go-jose/v3
      version: "v3.0.4"
      type: go-module
    reason: |
      HIGH — JWE decryption panic in go-jose v3.0.4 embedded in /usr/bin/caddy.
      Fix available in v3.0.5 but requires upstream Caddy rebuild. Charon does not use go-jose
      directly. Deferring to next Caddy release.
    expiry: "2026-05-05"  # 30-day review: remove once Caddy ships with go-jose/v3 >= v3.0.5.

    # Action items when this suppression expires:
    # 1. Check Caddy releases: https://github.com/caddyserver/caddy/releases
    # 2. Verify with: `go version -m /usr/bin/caddy | grep go-jose`
    #    Expected: go-jose/v3 >= v3.0.5
    # 3. If Caddy has updated:
    #    a. Rebuild Docker image and run local security-scan-docker-image
    #    b. Remove this entry, the v4 entry below, and any corresponding .trivyignore entries
    # 4. If not yet updated: Extend expiry by 30 days and update the review comment above
    # 5. If extended 3+ times: Open an upstream issue on caddyserver/caddy requesting go-jose update

  # GHSA-78h2-9frx-2jm8 (go-jose/v4) — see full justification in the go-jose/v3 entry above
  - vulnerability: GHSA-78h2-9frx-2jm8
    package:
      name: github.com/go-jose/go-jose/v4
      version: "v4.1.3"
      type: go-module
    reason: |
      HIGH — JWE decryption panic in go-jose v4.1.3 embedded in /usr/bin/caddy.
      Fix available in v4.1.4 but requires upstream Caddy rebuild. Charon does not use go-jose
      directly. Deferring to next Caddy release.
    expiry: "2026-05-05"  # 30-day review: see go-jose/v3 entry above for action items.

# Match exclusions (patterns to ignore during scanning)
# Use sparingly - prefer specific CVE suppressions above
match:
  # Exclude test fixtures and example code from vulnerability scanning
  exclude:
    - path: "**/test/**"
    - path: "**/tests/**"
    - path: "**/testdata/**"
    - path: "**/examples/**"
    - path: "**/*_test.go"

# Output configuration (optional)
# These settings can be overridden via CLI flags
output:
  # Report only HIGH and CRITICAL by default
  # Medium/Low findings are still logged but don't fail the scan
  fail-on-severity: high

# Check for configuration updates
# Grype automatically updates its vulnerability database
# Run `grype db update` manually to force an update
check-for-app-update: true